The 35C50 Airless® paint pump ensures constant and pulse-free delivery for superior, industrial finishing.
AIRLESS® PRODUCTIVITY FOR ALL
- Designed for long-lasting industrial use
- Fast color changes with minimum solvent consumption
- Simple design to minimize maintenance time and operation
Performance
- 1 Quiet and balanced air motor for constant delivery
- 1 Due to fast motor inversion at very low air pressures, there is limited pulsation
- 2 Stainless-steel fluid section adapted to a wide range of materials including water-based paints
- 3 Designed to eliminate dead zones for quick color changes
- ♦ Pulse-free for a superior finish
- ♦ Able to flush and prime at very low air pressures (0.6 bar/8.5 psi)
Productivity
- 3 Large foot valve to handle high viscosity materials up to 5,000 cPs – carbide seat
- 4 Reduced fluid section volume minimizes product and solvent losses during flushing.
- 5 Closed construction decreases the risk of injuries and protects the lubricant from external contamination
- 5 Leak indicator weep hole for fast visual inspection
- 6 Easy rotating outlet fitting to fit various configurations
Sustainability
- 1 Stall-free Differential Air Motor won’t ice up
- 3 Easy to service with direct access to the suction valve
- 4 Single piece built-in cartridge with no dead zone
- 6 Easy coupling for a quick disassembling
- ♦ Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the paint pump is operational
- ♦ Low maintenance, no external air distributor which allows 45% fewer parts vs our competition
- ♦ Triple chrome-plated piston parts compatible with most materials
- ♦ Magnetic reversing valve to eliminate pump surge
- ♦ Reduced spare parts: 50% fewer parts vs competition
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 35 | |
| Maximum Fluid Pressure | 210 (3000) | bar (psi) |
| Recommended Fluid Output | 750 | cc/mn (cfm) |
| Maximum Fluid Output | 1000 | cc/mn (cfm) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Air Consumption | 15 | m³/h (cfm) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Fluid Output at 30 cycles/mn | 1.5 (0.4) | l/min (gal/mn) |
| Fluid Volume per Cycle | 50 | cc |
| Free Flow Rate | 3 (0.79) | l/mn (gal/mn) |
| Fluid Output at 15 cycles / mn | 0.75 | l/mn (gal/mn) |
| Seal Packings | MB-A cartridge | |
| Fluid Outlet | M 1/2 JIC | |
| Fluid Inlet | M 26×125 | |
| Height | 58.5 | cm (in) |
| Width | 15.9 | cm (in) |
| Depth | 16 | cm (in) |
| Wetted Shares: Stainless Steel | ♦ | |
| Weight | 8 | kg (lbs) |
