Flowmax® paint pump for medium pressure – medium output applications.
Flowmax® technology for zero maintenance
Designed for moisture-sensitive & slightly abrasive materials
Extended lifetime
Performance:
♦ High output to feed several guns in circulation
♦ High suction power for materials up to 4,000 cps
♦ Turbo air motor available for continuous 24/7 use
Productivity
♦ Flowmax® bellows technology – total sealing & dust free, no lubricant cup
♦ Ideal for moisture-sensitive catalysts & UV products
Sustainability
♦ Triple chrome piston & cylinder, stainless steel ball & carbide seat for long-term use
♦ Sleek design with minimal parts. The inversion system provides a fast changeover for a constant material delivery
♦ Bellow life time 10,000,000 cycles – up to 8 years
Paint pump for medium pressure – medium output applications. Recommended for one to eight Airmix® gun operations.
Stainless steel construction
Designed for medium viscosity materials
Extended lifetime
Productivity:
♦Ideal for most materials
Sustainability:
♦Triple chrome piston & cylinder, stainless steel ball & carbide seat for long-term use
♦Sleek design with minimal parts. The inversion system provides a fast changeover for constant material delivery
The compact AIRMIX® paint pump is the ideal partner for your AIRMIX® spray guns providing exceptional finish quality & high transfer efficiency.
PRODUCTIVITY FOR ALL
Perfect Airmix® finish
Built with minimal parts
Lowest cost of ownership
Performance
♦Quiet and balanced air motor for constant delivery
♦Ergonomic design
♦Pulse-free for a superior finish
♦Able to prime at very low air pressure (0.6 bar / 8.7 psi) for easy paint loading
♦Designed to eliminate dead zones for quick color changes
Productivity
♦Closed construction – zero injury risk
♦Lubricant protected from external contamination
♦Easy rotatable outlet fitting to fit every configuration
♦No tie rods – intermediate hosing for easy assembly
♦Leak indicator weep hole for fast visual inspection
♦Simple coupling & quick disassembly
♦Large foot valve (Ø20, Ø14) to handle high viscosity materials up to 5,000 cPs – carbide seat
Sustainability
♦Differential air motor for a stall-free system
♦Quick reversing valve to eliminate pump surge
♦Ice-free air motor
♦50% fewer parts vs competition, less spare parts required
♦GT cartridge:
-no throat packing maintenance
-low friction
-flat cartridge body design to eliminate dead zones for easy flushing
♦Ultra chrome-plated piston rodless friction & abrasion resistance for increased pump life
♦Exhaust valve (upper) has large passages and carbide seat
The 15C50 compact AIRMIX® paint pump is recommended to handle all types of materials ranging from medium to low viscosity. The 15C50 AIRMIX® is particularly suited for 1 or 2 AIRMIX® gun applications and heated spray systems. Create various AIRMIX® & AIRMIX® electrostatic configurations with our large choice of accessories to meet all customer requirements.
The compact Airmix® painting pump is the ideal partner for your Airmix® spray guns, providing exceptional finish quality & high transfer efficiency.
ACCELERATOR OF PERFORMANCE
Efficiency: perfect for Airmix® finish
Optimization: built with minimal parts
Simplicity: lowest cost of ownership
PERFORMANCE
♦Constant delivery and pulse free for superior finish
♦Priming at very low air pressure (0.6 bar)
PRODUCTIVITY
♦Large foot valve to handle high viscosity materials up to 5,000 cPs
♦A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
♦Quick maintenance thanks to an easy rotable outlet fitting
♦Facilitate pump priming & flushing thanks to a design made to eliminate dead zone: time saved
♦Leak monitoring vent hole for fast control
♦A quiet air motor make very low noise
SUSTAINABILITY
♦45% less part vs competitors for the air motor to provide a better maintenance
♦Differential air motor to avoid the paint pump from frost
♦Ultra coated pluger for less friction & improved abrasion resistance
♦Single GT seal to avoid throat packing maintenance & low friction & offers a large lubricant wet cup
The 35C50 Airmix® paint pump ensures constant and pulse-free delivery for superior, industrial finishing.
AIRMIX® PRODUCTIVITY FOR ALL
Designed for long-lasting industrial use
Fast color changes with minimum solvent consumption
Simple design to minimize maintenance time and operation
Performance
1 Quiet and balanced air motor for constant delivery
1 There is minimal pulsation due to quick air motor change over at low air pressures
2 Stainless-steel fluid section compatible with a wide range of materials including water-based paints
3 Designed to eliminate dead zones for quick color changes
♦ Pulse-free for a superior finish
♦ Able to flush and prime at very low air pressures (0.6 bar/8.5 psi)
Productivity
3 Large foot valve to handle high viscosity materials up to 5,000 cPs – carbide seat
4 Small fluid section, minimal material loss during color changes
5 Closed construction decreases the risk of injuries and protects the lubricant from external contamination
5 Leak indicator weep hole for fast visual inspection
6 Easy rotating outlet fitting to fit various configurations
Sustainability
1 Stall-free Differential Air Motor won’t ice up
3 Easy to service with direct access to the suction valve
4 Single piece built-in cartridge with no dead zone
6 Easy coupling for a quick disassembling
♦ Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the pump is in operation
♦ Low maintenance, no external air distributor assembly. 45% fewer parts vs competition
♦ Triple chrome-plated piston parts compatible with most materials
♦ Magnetic reversing valve to eliminate pump surge
♦ Reduced spare parts: 50% fewer parts vs competition
The 35C50 Airmix® paint pump will deliver excellent performance and outstanding benefits because of our proven pumping technology. With a powerful air motor, the 35C50 can feed up to (2) Airmix® or (2) SFlow™ Airspray spray guns. It can handle material viscosities from 20 cps up to 5000 cps with very low air consumption. It comes with an optimized volume fluid section for fast color changes with minimal material loss.
The 35C50 Airmix® paint pump packages are available in wall-mount versions with cart mounting as an option. Packages are available with (1) Xcite™ 200 bar Airmix® manual spray gun equipped with a 12.114 tip and 7.5 m (25ft) air and fluid hoses. An Airless® version with the SFlow™ spray gun is also available. A large variety of options are available to meet all customer requirements.